Find Coal Bar Extruding Machine, Coal Extruder, Extruding Machine on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Mining Machinery > Coal Briquette Briquette Machine > Coal Rods/Sticks/Bars Extruder Extruding Machine

Coal Rods/Sticks/Bars Extruder Extruding Machine

Payment Type: L/C, T/T, Western Union, RMB/Cash
Min. Order: 1

Basic Info

Model No.:  MBJ140

Product Description

Model NO.: MBJ140 Product Shape: Cylinder Shape Condition: New Warranty Time: 12 Months Installation: Engineer′s Guided Technical Support: Long Term Application: Coal, Coke, Iron Dust, Charcoal Fines Specification: ISO9001 HS Code: 8474809090 Pressing Mode: Extrude Motor Type: AC Motor Machine Color: as Requirement Product Condition: New After Sale Service: Long Term Spare Parts Supply: Long Term Trademark: Sunshine Origin: Henan Province
Coal Rods/Sticks/Bars Extruding Machine Introduction

Coal Rods/Sticks/Bars Extruding Machine is also called coal rods extruder, using screw extrusion principle, pressing the the modulation good pulverized coal into the shape of a cylindrical or plum-shaped device with a certain strength, which is widely used in coal powder, coal dust, coal fines, coke, lignite, anthracite coal, iron, aluminum and other raw materials.
Coal rods extruder does not require adding lime during the process, reducing the cost of fuel, and improve the calorific value of coal, with high economic efficiency, in addition to coal rods squeeze extruder devices are small, no charring and drying equipment, no steam, saving investment, reducing the land requirement.
It re-uses the powered coal instead of using high price coal lumps, reducing production costs, improve economic efficiency, and provide a reliable guarantee.

                                                                           
Features of Coal Rods/Sticks/Bars Extruding Machine

1.Our machine absorbs the advanced technique at home and abroad.

2. Innovative design and reliable quality. The vane wheel is thickening blades which are made of wearing steel materials, and the lifetime will be 4-5 times higher than the normal.

3. Our machine adopts hard tooth face reducer, although it is small volume, but it has the high bearing and carring capacity.

4. Key parts are processed by imported high quality materials. The forming barrel are made of wearing removable alloy steel, and it can be easily changed and replaced.

5. The machine head and barrel are installed by the way of splicing, which is convenient for changing the vane wheel when we check and fix the machine.

6. High strength and toughness.

7. Temperature control, durability, adaptability.

8. High production capacity.

9. The mold of this machine can be changed for making different shapes products.

10. Besides the normal products, we can also design and manufacture special moulds as the customers' requirements.

11. The customers can purchase complete machine with other kind of moulds, then the machine can be multipurpose, and the customers can save capitals.

Installation of Coal Rods/Sticks/Bars Extruding Machine

1. All the part should be cleaned and checked before installation.

2. Install the machines on the level ground, and better on the concrete floor.

3. Before trying the machine, you have to add oil into the lubricant parts.

4. Check whether there is loosen parts, if yes, tight it directly. 

5. Inching the machine, and see whether there are clutters and unnormal sounds. If there is no, we can start the machine completely.

6. Driving the machine to run it without any material in for about 3-5 minutes, after make sure the machine works normal and good, we can put the materials in it for production.

7. If the feed opening apperas blocking, use a wooden stick to unclock, and mustn't use the metal of steel stick.

8. Add the oil for the transmission and rotating parts regularly. The temperature of bearing parts shold be less than 60 celsius degree.

9. Stop feeding the materials and make sure there is no any material in the cylinder before stopping the mahcine. Remove the machine head, clean it and theninstall it for next time using.

Technical data of Coal Rods/Sticks/Bars Extruding Machine

Model
MBJ140 MBJ180 MBJ300 MBJ450
Capacity 1-2T/H 2-3T/H 4-6T/H 8-10T/H
Stick Size 20-40mm 20-60mm 20-80mm 20-80mm
Main Shaft Speed 46-60rpm 39-60 rpm 35-60 rpm 35-60 rpm
Screw Blades 4 4 4 4
Motor Power 11Kw 22 Kw 90 Kw 220 Kw
Reducer Model ZQ350 ZQ400 ZQ650-750 ZQ850
Overall size 1900*1100*1170mm 2210*1370*1440mm 3605*1025*955mm 5130*1520*1480mm


The requirements of feeding materials:
1. The inlet particle size of materials must be less than 3mm.

2. We have to add suitable binder for some kind of materials for shaping easily.

3. The moisture of materials must be moderate, and the water content usually is 12%-15%.


Our service for our customers:
Before Service:
1. According to our customers special requirements, provide the most suitable project design, process design and the purchase program.
2. Guide customers to choose the best and economical plant, recover investment within short time, and site inspection.

On sale service:
1. Accompany you to check the working conditions of our machines.
2. Inspect the quality of all our machines.
3. Manufacturer the equipments as the contact appears at first time after receive your deposit. Arrange the delivery timely.


After sale service:
1. Send engineers to your site, help you to install and debugging devides, build plant, and training operators, at the same time pass the technology on clay brick production to customers.
2. Guarantee of the equipments quality, maintenance, etc. Solve all the troubles for you timely during your production when receive your call oure-mails.

Contact us if you need more details on Coal Bar Extruding Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Coal Extruder、Extruding Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Mining Machinery > Coal Briquette Briquette Machine

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters